Home Decorators Collection 257-188-213 Guía De Uso Y Cuidado página 40

Maintenance (continued)
Disconnect power before servicing.
Any electrical re-wiring of this appliance must be done by a qualified electrician. This wiring must be done in
accordance with local codes and/or in Canada with the current CSA C22.1 Canadian Electrical Code, and for US
installations, the National Electrical Code ANSI/NFPA NO 70.
If repairing or replacing any electrical component or wiring, the original wire routing, color coding and securing
locations must be followed.
CIRCUIT DIAGRAM
WARNING: Disconnect power before servicing.
Care & Cleaning
□ Always turn the heater OFF and unplug the power cord from the outlet before cleaning.
□ Cleaning of the control panel, located in the upp right-hand corner of the fireplace behind the sliding control panel cover, is to be done
only using a soft cloth, slightly dampened in water (if needed, a small amount of dish soap can be added to the water) and dried using
a clean, dry soft cloth. Cleaning of the screen diffuser is to be done using only water and lint free cloth. DO NOT use any abrasive
controls and the diffusing screen.
DANGER
12