Resumen de contenidos para Dorel Home Products 5563719WE
Página 1
Visit www.dhpfurniture.com/eng/replacement-parts or call Toll-Free 1-800-267-1739 Date of Purchase Lot Number THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. C.W. - 2018/9/3 B345563719WE02 2014 Dorel Home Products All Rights Reserved...
Página 2
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and ● Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of ●...
Página 3
Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Post Post Post Post End Guard Rail Check Box to identify the parts and ensure that T956140 T956110 T956120...
Página 4
Parts Replacement Parts, visit www.dhpfurniture.com/eng/replacement-parts All in 1 big box! There are inner box(es) that include components required to complete this assembly. Before you throw the package, please use the Guard Rail Guard Rail Ladder Check Box to identify the parts and ensure that T956220 T956230 T956240...
Página 5
Hardware Pack Hardware Pack #: T5563196WE-00 1/4" 5/16" X 3/4" X 16 1/4" X 1 3/16" 1/4" X 2" X 22 1/4" X 2 3/8" Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Página 6
Step 1 Attach I to C & D with Attach T to C & D with For your safety, please ensure that the warning on I is oriented towards upside and inside of the bed. Warning label on part I should be oriented on the same side as side rail holes!
Página 7
Step 2 Attach G to A & B with Attach T to A & B with...
Página 8
Step 3 Attach J X 2, H and K to A/B/C and D with Attach X to T with Wide side of the slot should be facing up ! Holes on H & K for ladder should be located close to X 16...
Página 9
Step 4 Insert O into H and J on upper bed (TWIN SIZE), lock O in-place with Y. Insert P into K and J on lower bed (FULL SIZE), lock P in-place with Y.
Página 10
Step 5 5.1 Press W onto O approximately in the middle for upper bed. Press W onto P following the distances as shown for lower bed. 5.2 Press Q onto W alternating left and right. For better performance of lower bed, attach the Slat Spacers Q at equal spaces.
Página 11
Step 6 6.1 Attach E to B & C with , Attach F to A with 6.2 Attach F to H with...
Página 13
Helpful Hints Weight Limit: Upper Bed: 200 Lb / 91 Kg Lower Bed: 450 Lb / 204 Kg ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move.
Página 14
WARNINGS for Bunk Bed ● Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed. ● Always use the recommended size mattresses or mattress supports, or both, to help prevent the likelihood of entrapment or falls. ●...
Página 15
5563719WE NO LO REGRESE A LA TIENDA ! Litera de metal Si le faltan piezas o las que se incluyen están dañadas, con mucho gusto le enviaremos sus piezas de reemplazo sin cargo extra. Individual - Matrimonial Visite www.dhpfurniture.com/spa/replacement-parts Rosa...
Página 16
Partes Instrucciones Paso 1 Piezas de reemplazo, visite www.dhpfurniture.com/spa/replacement-parts 1.1 Una la parte I en C & D con Todo se incluye en 1 caja grande! 1.2 Una la parte T en C & D con Hay 1 caja(s) interna(s) que incluyen los componentes necesarios para Paso 2 completar este ensamblaje.
Página 17
Límites de peso: 200 lbs / 91 kgs en la cama superior; 450 lbs / 204 kgs en la Consejos tiles cama inferior. ● Mueva sus muebles nuevos con cuidado, con dos personas levantando y llevando el aparato a su nueva ubicación. Precauc on ●...