Atsumi Electric Tri Watcher SIR10S Manual De Instalación página 5

9
Align the alarm direction, and tighten the screw of the
lower cover.
* Check the alarm direction index to make sure the
direction.
Main device
Alarm direction
index
Lower cover
6. USING AS A PET ALLEY MODE
1
Loosen the lower cover screw by about 5 mm, and
rotate the main device by 180 degrees.
Main device
2
Loosen the two screws, and take off the small cover.
Small cover
3
Loosen the board fix screw, and slide all the way
in the direction of the arrow. Check that the alarm
selection index is in the "P" position, and tighten the
board fi x screw.
Alarm selection index
(The device is set to the wide mode in default)
4
Loosen the six cover screws.
Lower cover
5
Rotate the main device by 180 degrees so that it is
facing forward.
Main device
6
Remove the front cover.
Cover
Lens 1
Board fi x screw
5
Lens 2
Lens 1'