Publicidad
Idiomas disponibles
Idiomas disponibles
Next, place the headband on your head; you can make size adjustments by turning the
knob on the rear of the headband until it feels comfortable. For more comfort you can
adjust the cross band.
Once the headlight module and cable are connected, the unit is ready for use.
The system comes with gown clips to relieve the weight of the cable from the headband.
One gown clip is attached below the shoulder.
Once the battery is depleted into the last shown "block" on the power gauge, the unit may
beep once to indicate low battery levels. The unit may beep twice to indicate further
reductions in power before shut-down.
4. MAINTENANCE
Storing the headlight system in a safe place will prolong the life of the unit.
The following guidelines will help in sustaining the headlight system useful life:
•
Keep the optical faces of the LED Headlight lens from touching hard surfaces,
which may cause scratches on the surface. Scratches on the surface will
diminish the light output. Using the lens cap during transport will help protect the
lens.
5. CLEANING
The headlight module can be wiped down with alcohol. The lens should be cleaned only
with lens tissue, available in any camera store; follow the directions on the package.
Follow all applicable bloodborne pathogen procedures as required by OSHA and/or your
hospital, when cleaning and disinfecting the product.
The headband can be cleaned with a alcohol wipe down or washed with a
lukewarm solution of water and mild detergent. Rinse thoroughly.
Do not autoclave the LED Headlight module, headband, cable, battery or
battery holster.
6. DESKTOP SMART CHARGER AND CALIBRATOR
Please refer to the separate battery and charger IFUs for detailed instructions on how to
safely operate these devices.
7.
REPLACEMENT PARTS
For replacement parts, additional or optional equipment :
Please call Customer Service @ 877 814 2237
®
LIT-224 CUDA
(English)
Rev. A
Date of Revision: 02/01/18
Page 5 of 35
Publicidad
