Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 9
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
With the help of another person, carefully turn your unit over on its front side. Make sure the unit
is square. Position the back panel as shown. Using screws (5), attach back panel to back (E) but do
not tighten the screws. Align the back panel equally with outside edges and nail straight through
into back edges as shown. Now tighten the screws (5).
finished edges face down
WARNING
Please make sure that the Back Panel is attached securely.
All nails must be driven into the parts straight and centered.
Failure to do so could cause instability, product collapse,
and/or serious injury.
ameriwoodhome.com
6
5
(x6)
(x28)
#A12120
#A21110
B
18
6
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
E
D
5
Publicidad
