Blackmagic Design HyperDeck Manual De Instalación Y Funcionamiento página 45

Active la función de control remoto presionando el botón REM en el panel frontal del
dispositivo, o desde el menú en pantalla, para activar el protocolo de control RS-422.
Todos los modelos HyperDeck pueden ser controlados remotamente a través
del puerto RS-422, situado en el panel trasero de los dispositivos.
Comandos compatibles con el protocolo RS-422
Command
0 - System Control
0x00 0x11 DeviceTypeRequest
1 - Slave Response
0x20 0x00 Stop
0x20 0x01 Play
0x20 0x02 Record
0x20 0x04 StandbyOff
0x20 0x05 StandbyOn
0x20 0x0F Eject
0x20 0x10 FastFwd
0x21 0x11 JogFwd1
0x22 0x11 JogFwd2
0x21 0x12 VarFwd1
0x22 0x12 VarFwd2
0x21 0x13 ShuttleFwd1
0x22 0x13 ShuttleFwd2
0x20 0x20 Rewind
0x21 0x21 JogRev1
0x22 0x21 JogRev2
0x21 0x22 VarRev1
Reply No Remote
NTSC: 0xF0E0
PAL: 0xF1E0 Enabled
24P: 0xF2E0
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Control mediante el puerto RS-422
Notes
Treated as N=1;
Same as JogFwd1
Uses ShuttleFwd1
Treated as N=1;
Same as VarFwd1
Treated as N=1;
Same as ShuttleFwd1
Treated as N=1;
Same as JogRev1
Uses ShuttleRev1
330