Información para desarrolladores
Protocolo de Ethernet para el modelo Blackmagic HyperDeck
Este protocolo está basado en texto y se accede al mismo mediante el puerto TCP 9993 en
los modelos HyperDeck Studio con conexión Ethernet. El protocolo de control integrado para
dispositivos de video facilita la integración de nuestros productos con otros dispositivos. Nuestra
filosofía en Blackmagic Design es mantener los protocolos abiertos para facilitar la colaboración
entre usuarios durante los procesos creativos.
Protocol Commands
Command
help or ?
commands
device info
disk list
disk list: slot id: {n}
quit
ping
preview: enable: {true/false}
play
play: speed: {-5000 to 5000}
play: loop: {true/false}
play: single clip: {true/false}
playrange
playrange set: clip id: {n}
playrange set: clip id: {n} count: {m}
playrange set: in: {inT} out: {outT}
playrange set: timeline in: {in} timeline out:
{out}
playrange clear
play on startup
play on startup: enable: {true/false}
play on startup: single clip: {true/false}
play option
play option: stop mode:
{lastframe/nextframe/black}
record
record: name: {name}
record spill
Command Description
Provides help text on all commands and parameters
return commands in XML format
return device information
query clip list on active disk
query clip list on disk in slot {n}
disconnect ethernet control
check device is responding
switch to preview or output
play from current timecode
play at specific speed
play in loops or stop-at-end
play current clip or all clips
query playrange setting
set play range to play clip {n} only
set play range to {m} clips starting from clip {n}
set play range to play between:
- timecode {inT} and timecode {outT}
set play range in units of frames between:
- timeline position {in} and position {out} clear/reset play
range setting
clear/reset play range setting
query unit play on startup state
enable or disable play on startup
play single clip or all clips on startup
query play options
set output frame when playback stops
record from current input
record named clip
spill current recording to next slot
Información para desarrolladores
338