•
Place filter basket inside filter holder and into the brewing head by pushing it upward so that the
handle of the filter holder is aligned with the word "INSERT" on the top of the brewing head.
•
Turn the handle counter-clockwise until aligned with the word "LOCK".
•
Place the empty glass carafe with lid on drip tray directly under the brewing head.
•
Plug into a standard 120 Volt AC outlet. •
•
Rotate the function knob to the "cup" symbol (
Rotate the function knob to the "cup" symbol (
indicates that the coffeemaker is on.
•
After approximately 2-3 minutes, espresso coffee will flow into the carafe.
Caution: Do not open the lid to the water reservoir or remove the filter holder during the brewing
process. Scalding may occur.
•
When the coffee is done dripping into the carafe. Please switch the control knob to the "PAUSE"
position and the indicator light is off. The machine stops working and the espresso is ready to be
serve.
•
Switch the control knob to the position of "RELEASE PRESSURE" and discharge the remained
pressure.
•
After product finishing working, please shut down the power switch immediately.
Caution: Do not remove the water reservoir lid until pressure is completely released. Follow the
"CAUTION: PRESSURE" procedures.
Caution: Do not remove the filter holder at any time while the coffeemaker is under pressure or until the
coffeemaker has cooled down. Follow the "CAUTION: PRESSURE" procedures.
•
Unplug unit and allow the coffeemaker to cool.
Cappuccino
•
Fill a frothing pitcher (not included) ¾ of the way with cold milk.
Note: Whole Milk or 2% will be the easiest to froth.
•
Make sure the control knob is in the PAUSE position.
•
Turn the ON/OFF switch the ON position.
•
Remove the water reservoir lid by turning it counter-clockwise.
•
Fill the glass carafe with fresh cold water up to either the 2 or 4 cup mark.
ESPRESSO & CAPPUCCINO MAKER
USE AND CARE INSTRUCTIONS
), which begins the brewing process. The light
), which begins the brewing process. The light
9