Description Of Symbols; General Safety - Triton TWX7 RT001 Instrucciones De Montaje

Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary for safe and effective operation of this
product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual carefully to ensure you fully understand the
instructions. Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Be aware of kickback!
Warning: Sharp blades or teeth!
Indoors use only!
DO NOT use in rain or damp environments!
WARNING: Moving parts can cause crush and cut injuries.
Caution!
Toxic fumes or gases!
DO NOT touch! DO NOT access the guard without removing the power. Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control. All visitors should be kept safe distance from work area.
Always disconnect from the power supply when adjusting, changing accessories, cleaning, carrying out maintenance and when
not in use! s can cause you to lose control. All visitors should be kept safe distance from work area.
Technical Abbreviations Key
V Volts
~, AC Alternating current
A, mA Ampere, milli-Amp
n
No load speed
0
Ø Diameter
° Degrees
λ
Wavelength
Hz Hertz
, DC
Direct current
W, kW
Watt, kilowatt
/min or min -1 Operations per minute
dB(A)
Decibel sound level (A weighted)
m/s 2 Metres per second squared (vibration magnitude)
GB
2
Original Instructions
Specification
Part no:
Compatible routers:
Router module size:
Workcentre table size:
Extruded fence size:
Extruded fence thickness:
MDF fence face size (x 2):
Max MDF fence face opening:
Fence adjustable position:
Fence micro adjusters:
Spacer bar settings:
Guard height:
Featherboard stack height:
Maximum throat plate router
bit diameter (Dmax);
Dust Extraction fitting (Dia):
Net weight:

General Safety

WARNING! When using electric power tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and
personal injury including the following safety information. Read all these instructions before attempting to operate this product and save these
instructions for future use.
WARNING: This appliance is not intended for use by persons (including children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children must be supervised to ensure that they do not play with the appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
1 - Keep work area clear - Cluttered areas and benches invite injuries
2 - Consider work area environment
- Do not expose tools to rain
- Do not use tools in damp or wet locations
- Keep work area well lit
- Do not use tools in the presence of flammable liquids or gases
3 - Guard against electric shock - Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators)
4 - Keep other persons away - Do not let persons, especially children, not involved in the work touch the tool or the extension cord and keep
them away from the work area
5 - Store idle tools - When not in use, tools should be stored in a dry locked-up place, out of reach of children
6 - Do not force the tool - It will perform the job better and safer at the rate for which it was intended
7 - Use the right tool - Do not force small tools to do the job of a heavy duty tool.
Do not use tools for purposes not intended; for example, do not use circular saws to cut tree limbs or logs
8 - Dress appropriately
- Do not wear loose clothing or jewellery, which can be caught in moving parts
- Suitable safety footwear is recommended when working outdoors
- Wear protective covering to contain long hair
- Use protective equipment
9
- Use safety glasses
- Use face or dust mask if working operations create dust
WARNING: Not using protective equipment or appropriate clothing can cause personal injury or increase the severity of an injury.
10 - Connect dust extraction equipment - If the tool is provided for the connection of dust extraction and collecting equipment, ensure these
are connected and properly used
11 - Do not abuse the power cable - Never yank the power cable to disconnect it from the socket. Keep the power cable away from heat, oil
and sharp edges. Damaged or entangled power cables increase the risk of electric shock
12 - Secure work - Where possible use clamps or a vice to hold the work. It is safer than using your hand
13 - Do not overreach - Keep proper footing and balance at all times
14 - Maintain tools with care
- Keep cutting tools sharp and clean makes the tool easier to control and less likely to bind or lock in the workpiece
- Follow instruction for lubricating and changing accessories
- Inspect tool power cables periodically and if damaged have them repaired by an authorized service facility
- Inspect extension cables periodically and replace if damaged
- Keep handles dry, clean and free from oil and grease
WARNING: Many accidents are caused by poorly maintained power tools.
15 - Disconnect tools - When not in use, before servicing and when changing accessories such as blades, bits and cutters, disconnect tools
from the power supply
WARNING: The use of accessories or attachments not recommended by the manufacturer may result in a risk of injury to persons.
16 - Remove adjusting keys and wrenches - Form the habit of checking to see that keys and adjusting wrenches are removed from the tool
before switching it on
17 - Avoid unintentional starting - Ensure switch is in "off' position when connecting to a mains socket or inserting a battery pack, or when
picking up or carrying the tool
WARNING: Unintended starting of a tool can cause major injuries.
18 - Use outdoor extension leads - When the tool is used outdoors, use only extension cords intended for outdoor use and so marked. Use of
an extension cable suitable for outdoor use reduces the risk of electric shock
19 - Stay alert
TWX7RT001
Triton TRA001
Triton MOF001
Triton JOF001
660 x 410mm
904 x 708mm
680 x 85mm
21.4mm
340 x 75mm
90mm
+25/-125mm
1mm (one full revolution)
0.5, 1.0, 1.5, 2.0mm
0-76mm
1: 9.5mm, 2: 15mm, 3: 44mm, 4: 50mm
Large - 50mm
Medium - 40mm
Small - 20mm
31.75mm High Pressure / 62.5mm Low Pressure
9.9kg