Perel E301LS Manual Del Usuario página 6

5. Operation
6. Cleaning and Maintenance
V. 01 – 13/12/2017
Testing the Detector
1. Test the detector at the point of time
you feel the lamp needs to be switched
on.
2. Switch on the power. The detector needs
a warm-up time of ± 30 seconds before
it will switch on the connected lamp.
3. Turn the LUX knob fully anti-clockwise.
The lamp should switch off.
Setting the Detector
1. Turn the LUX knob until the lamp
switches on.
2. Close the detector with the cover and
tighten the screw.
This appliance does not need any particular
maintenance. However, occasionally wipe it
with a damp cloth to keep it looking new.
Do not use harsh chemicals, cleaning
solvents or strong detergents.
E301LS
6 ©Velleman nv