Publicidad
Idiomas disponibles
Idiomas disponibles
BRASS EXTENSION
SPRING WASHER
NUT
LOCK
1/2 HOLE
13/16 COUNTER
BORE 7/16 DEEP
3/4 INCH
WOOD PANEL
Figure 20
Step 7: Install the door
Carefully open the top and bottom hinges on the door being
careful as there are many pinch points. Place the hinges
over the 4 screws in the cabinet, 2 at the top and 2 at the
bottom and slide the door into position. Tighten the 4 hinge
screws with a phillips screwdriver. (See Figures 8 and 8a).
Place wire harness from the grille and mount to the bot-
tom of the door with the screw and "P" clamp removed in
step 1. (See Figure 8b). Reconnect the wire harness, (See
Figure 9).
Step 8: Secure the cabinet
Use the #8 x
⁄
" black screws from the literature pack to
3
4
secure the counter top to the cabinet top through the holes
in the cabinet "Z" bracket.
OVERLAY DOOR PANEL INSTALLATION
CAM
PHILLIPS SCREW
INNER
DOOR
SECTION A-A
SCALE 1 : 1
1.234" (31.3 mm)
.991" (25.2 mm)
Cabinet
"Z" bracket
#8 x
⁄
" black
3
4
screws
(3 places)
Figure 21
17
Figure 22
Publicidad
