Publicidad
Reverse the front door
To accommodate different rack configurations, you can reverse the front door of the
enclosure so that it opens to the left or right of the enclosure. The front door of the
enclosure is attached to the enclosure with levers that are located at the top and
bottom of the front door.
1. In the top corner of the inside of the front door, pull the lever down and move the
top corner of the front door away from the enclosure.
2. In the bottom corner of the inside of the front door, pull the lever up and remove
the front door from the enclosure. (figure 5)
figure 5
Instruction manual
8
Publicidad
