Note:
Loosen the pre-attached
wing nut on the burner
assembly before performing
Step 12.
Step 12
Insert the side burner valve
assembly through the holes in
the side burner front panel, then
firmly seat the valve nozzle into the
burner venturi. Rotate burner valve
assembly counterclockwise to lock
in place with keyholes. Then tighten
pre-attached bolts. Place the side
burner control knob on the side
burner valve stem.
Note:
Tighten the nuts on the
burner assembly securely.
Step 13
Place the side burner grate onto the
side burner table.
Step 14
Attach side burner igniter lead wire
to the electrode as illustrated.
Warning:
Never use your grill
without leak testing all gas
connections and hoses.
See the section on "Leak
Testing" in this manual for
proper procedures.
25
Wing Nut
Side
Burner
Valve
Valve
Nozzle
Keyholes
Bezel
Side Burner
Valve Stem
Electrode
Side Burner
Igniter Lead
Burner
Venturi
Side Burner
Control Knob
Side Burner
Grate