Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLE THE WHEELS, HANDLE AND ACCESSORIES
1. Slide axle (4) through wheel support frame (3). Install in the following order: spacer rings (9), wheels (5), and
cap nuts (10) on axle ends, by tapping lightly. Connect the flue adaptor (11) to the exhaust collar and then
to a flue pipe (indirect-fired heaters only).
2. Place heater on wheel support frame and line up holes on the fuel tank flange with holes on wheel support
frame.
3. Insert screws and washers through handles, fuel tank flange and wheel support frame. Attach nut finger
tight after each screw is inserted, then tighten all nuts firmly.
10
ASSEMBLY
1) 1 Body Of The Heater
2) 1 Handle
3) 1 Wheel Support Frame
4) 1 Axle
5) 2 Wheels
6) 4 Screws
7) 4 Nuts
8) 4 Washers
9) 2 Spacer Rings
10) 2 Cap Nuts
11) Flue Adaptor
Kerosene Portable Heaters Manual
Publicidad
