Haverland DES19 Manual Del Usuario página 28

Operation Instructions
Auto Shut o with Water Tank Full Indicator
The unit will go to the standby mode when the water tank is full or the water tank is not installed
properly. After emptying the tank, or installing the water tank properly the unit will switch to the
previous mode it was on before.
Except for the power button, all other buttons are not in use in this mode.
Memory Function:
a. When unplugged from the mains or in the event of a power cut, once the appliance is turned on
again, the dehumidi er will run with the mode it was selected prior to the shutdown. The timer
will be saved.
b. Press the power button to switch o the dehumidi er, and then press the power button to switch
it back on. The dehumidi er will run with the selected mode prior to the shutdown. The timer
setting will be canceled.
c. Switch o the dehumidi er and unplug the power plug, then reconnect the power supply and
switch on the dehumidi er. The appliance will be restored to the pre-set factory mode.