Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
Thank you for trusting in Mondial. To ensure proper operation and maintenance of the
product, carefully read the instructions in this manual and keep it in the event that you may
need in the future. We recommend that you also keep the packaging in case of repairs, and
dispose of all plastic bags that could become dangerous toys for children.
The appliance is very easy to use. Just connect it to the electricity supply socket (220-
250V).
If you need more information, please contact Mondial.
Advice:
The use of Mondial appliances by children needs clear instructions of use and
constant supervision during use of the appliance.
OPERATION
The instrument consists of the following parts, see fig.A:
Before using the appliance:
˃
Unpack the appliance.
˃
Clean the appliance. See "Cleaning and Care"
Use (See fig.A)
˃
Place the appliance on the floor at a minimum distance of 45 cm from the wall.
˃
Check to see if the Power Selector Button is in the (0) OFF position and if the
Temperature Control Button is in the OFF position.
˃
Connect the cable plug into the socket compatible with the product's voltage.
˃
Turn the Power Selector according to your preference:
• Position I for Minimum Power
• Position II for Maximum Power
˃
Turn the Temperature Control Button completely to the right until the maximum
position is reached.
˃
The Pilot Light should turn on.
˃
To adjust the room temperature to the desired level, turn the Temperature Control
Thermostat Button to the right to increase the temperature or to the left to reduce
the temperature.
˃
The thermostat automatically turns off the heater when the selected temperature
is reached, operating again when the air close to the appliance starts to cool down.
˃
At the maximum level, the appliance remains turned on continuously and it is
indicated for use within a short period of time.
˃
To use the ventilation function, turn the Power Selector Button to position ( ) and
then turn the Temperature Control Button until the Pilot Light turns on.
˃
It is ready to be used as a fan.
˃
After use, put the Power and Temperature Buttons in the OFF position and
remove the plug from the outlet.
10
UK
CLEANING AND CARE
˃
Wait until the appliance has cooled down completely.
˃
Always put the Temperature and Power Buttons in the OFF position and remove
the plug from the power outlet before cleaning.
˃
For external cleaning, wipe with a dry or slightly damp, soft cloth not to scratch the
finishing material of the surfaces.
˃
Never use steel wool, wad or any kind of abrasive cleaners or materials, as they
may damage your appliance.
˃
Do not use waxes or polishing materials since these may react with the heat and
cause discoloration of the paint.
˃
Never immerse the appliance in water.
SAFETY
General Information
˃
Read the instructions carefully and keep for future reference.
˃
Use the appliance following the instructions for use.
˃
Use the appliance for domestic purposes only. Commercial use implies the
cancellation of the warranty.
˃
The use of the appliance by children or persons with physical, sensory, mental or
motor disabilities, and without knowledge and experience, can lead to dangerous
situations. Those responsible for the safety of these people should convey clear
instructions or supervise the appliance's use.
˃
Do not allow children to play with the appliance.
˃
Do not handle or try to repair the system on your own. In case of incident, please
contact our technical service to avoid risks.
˃
Use only original parts and accessories of the appliance. Never use parts of
another appliance or with defects.
Electricity and heat sources
˃
Before connecting the appliance, ensure that the supply voltage corresponds to
the voltage indicated on the plate along with the your appliance's features.
˃
Use a power outlet with grounding.
˃
Always remove the power jack connector when not using the appliance.
˃
The unit is not enabled for use with an external timer or remote control.
˃
When unplugging the connector, be sure to pull the plug, not the cord.
˃
Do not use the appliance if the cable is damaged. Contact our technical service to
avoid risks.
˃
Damaged cables of this appliance should only be repaired by our technical
service.
˃
Make sure that neither the appliance nor the cable or the connector are in contact
with heat sources, for example, with a hot plate counter top with fire or other heat
sources.
˃
Ensure that neither the appliance nor the cable or the connector are wet or in
contact with water.
˃
Ensure that there is enough free around it and that it does not make contact with
UK
11
Publicidad
