NS-RTV32 32-inch MTS Stereo Color TV
Specifications
Design and specifications are subject to change
without notice.
Power supply
Power Consumption
Operation
Standby
Chassis Construction
Weight
Width
Height
Depth
Inputs
VIDEO
AUDIO
S-VIDEO
COMPONENT
Output
DIGITAL AUDIO
Other
Antenna input
Picture tube
Tuner type
Receiving channels
Speakers
Sound output power
Troubleshooting
Use the following checklist for troubleshooting
when you have problems with your television.
Consult your local dealer or service outlet if
problems persist. Be sure all connections are
properly made when using with other units.
AC 120V, 60 Hz
110 Watts
3 Watts
114.7 lbs. (52.0 kg)
29-9/16 inches (751 mm)
25-15/16 inches (659 mm)
21-13/16 inches (554 mm)
1 V (p-p)/75 ohms
–8 dBm/50k ohms
Y: 1 V (p-p), 75 ohms
C: 0.286 V (p-p), 75 ohms
Y: 1 V (p-p), 75 ohms
PR: 0.7 V (p-p), 75 ohms
PB: 0.7 V (p-p), 75 ohms
0.5 V (p-p), 75 ohms
VHF/UHF In 75 ohm coaxial
32 inches (800.1 mm diagonal)
Quartz PLL frequency
synthesized
VHF 2-13
UHF 14-69
CABLE TV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
1-13/16 inches (45.7 mm) x
3-7/8 inches (99.1 mm), 8 ohm
x 2
1.0 W + 1.0 W
www.insignia-products.com
Problem
Solution
Television does not
• Make sure the power cord is
operate.
plugged in.
• Try another AC outlet.
• Power is off. Check fuse or
circuit breaker.
• Unplug television for an hour,
then plug it back in.
Poor sound or no
• Station or cable experiencing
sound.
problems. Tune to another
station.
• Check sound adjustments
(volume and mute).
• Check for sources of possible
interference.
Poor picture or no
• Station or cable experiencing
picture.
problems. Tune to another
station.
• Make sure channels are set into
memory.
• Check antenna or cable
connections. Adjust the
antenna.
• Check for sources of possible
interference.
• Check picture control
adjustments.
Poor reception on
• Station or cable experiencing
some channels.
problems. Tune to another
station.
• Make sure channels are set into
memory.
• Station is weak. Adjust the
antenna to receive the desired
station.
• Check for sources of possible
interference.
Poor color or no
• Station or cable experiencing
color.
problems. Tune to another
station.
• Make sure channels are set into
memory.
• Check picture control
adjustments.
• Check antenna or cable
connections. Adjust the
antenna.
• Check for sources of possible
interference.
Picture wobbles or
• Station or cable experiencing
drifts.
problems. Tune to another
station.
• Make sure channels are set into
memory.
• Cable company is scrambling
signal.
• Adjust antenna.
Digital
• Check digital signal strength.
broadcasting
screen problem.
No CATV
• Check all cable connections.
reception.
• Set TV/CABLE menu option to
the CABLE mode.
• Station or cable system
problems. Try another station.
Horizontal or
• Check antenna connections.
diagonal bars on
• Adjust or re-direct antenna.
screen.
• Check for sources of possible
interference.
17