Publicidad
Idiomas disponibles
Idiomas disponibles
START/STOP
How to connect hose to the controller
After connecting a connectable hose plug to air socket of the controller, connect
the other remained plug of the hose to air socket of cuff.
There's a hole next to the air socket which user can connect the safety switch.
Press the safety switch button, stop the operation.
Product standard and specifications
Time control
1~90 minutes
Pressure control
10~200mmHg
Product dimension
415 x 310 x 160 mm
Product weight
6.5kg (Only body)
※ The label is located on the bottom of the device.
Individual operation (CH1/CH2)
In order to operate CH1, the user can touch "
"
" will turn to blue. To stop operating, the user can touch it again,
then, it will turn to red.
In order to operate CH2, the user can touch "
"
" will turn to blue. To stop operating, the user can touch it again,
then, it will turn to red.
" on CH1, then,
" on CH2, then,
Rated voltage
AC 220~230V, 50/60Hz
Fuse capacity
AC 250V / 2A
Power consumption
70VA
9
Publicidad
