Velleman KSR10/USBN Manual Del Usuario página 3

4. System Requirements
•
free USB 2.0 port
•
Windows
5. Installation
Download and install the software. To do so, go to the product page on
www.velleman.eu > Downloads > Software.
Physically connect the robot arm to your PC using a USB cable. Switch on the robot
arm.
Open the software.
You can now move the robot arm by pressing the corresponding key on your keyboard
or by clicking the corresponding key on the screen.
You can also write a manoeuvre sequence. To do so, click the recording button on the
bottom of the screen and press the corresponding key on your keyboard.
V. 02 – 25/04/2022
KSR10/USBN
®
8.1 or higher
3 ©Velleman Group nv