Publicidad
Idiomas disponibles
Idiomas disponibles
WIFIDS10xx
1
2
Wi-Fi smoke and heat detector
Description (fig. A)
The smoke and heat detector is a device used to detect
smoke and heat. The device does not detect gas. The
device is suitable for indoor use only. If the device
detects smoke or heat, the alarm will sound and the LED
indicator will flash red continuously until it is eliminated.
1. Test button
2. LED indicator
3. Siren
4. Smoke intake
5. Mounting plate
Safety
•
Read the manual carefully before use. Keep the
manual for future reference.
•
Only use the device for its intended purposes. Do not
use the device for other purposes than described in
the manual.
•
Do not use the device if any part is damaged or
defective. If the device is damaged or defective,
replace the device immediately.
•
The device has a limited lifetime. Replace the device
10 years after the date of purchase. Write the
purchase date on the manual for future reference.
4
3
Battery safety
•
Use only the batteries mentioned in the manual.
•
Do not use old and new batteries together.
•
Do not use batteries of different types or brands.
5
•
Do not install batteries in reverse polarity.
•
Do not short-circuit or disassemble the batteries.
•
Do not expose the batteries to water.
•
Do not expose the batteries to fire or excessive heat.
•
Batteries are prone to leakage when fully discharged.
To avoid damage to the product, remove the
batteries when leaving the product unattended for
longer periods of time.
•
If liquid from the batteries comes into contact with
skin or clothing, immediately rinse with fresh water.
Installation (fig. B)
Warning!
•
Do not use the device outdoors.
•
Do not expose the device to water or moisture.
•
Install the device out of the reach of children.
•
Install at least one device at each floor level.
Preferably install one device in each recommended
area.
•
Do not install the device in bathrooms, toilets or
other rooms where the device can be triggered by
steam or condensation. Install the device at least 3
meters away from these rooms.
•
Do not install the device in rooms where normal
combustion occurs regularly.
•
Do not install the device in rooms with temperatures
below 5 °C or above 37 °C.
•
Do not install the device in dusty or dirty
environments.
•
Do not install the device near doors and windows.
•
Do not install the device near radiators or air vents in
walls or ceilings.
•
Do not install the device behind curtains or furniture.
•
Do not use rechargeable batteries in order to prevent
malfunctions.
•
Do not paint the device.
3
English
Publicidad
