LEGRAND SANUS Accents ALT2 Manual De Instalación página 2

– PLEASE READ MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
CAUTION:
Avoid potential personal injuries and property damage!
● This product is designed ONLY to be installed into wood studs, solid concrete* or concrete block*, and steel studs*,
— DO NOT INSTALL INTO DRYWALL ALONE — DRYWALL ALONE WILL NOT HOLD THE WEIGHT OF YOUR TV.
*For information on how to use this product with concrete or steel stud walls contact Customer Service and ask about the mounting kit.
● This product is designed for INDOOR USE ONLY
● The wall must be capable of supporting five times the weight of the TV and mount combined
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Please read through these instructions completely to be sure you're comfortable with this easy install process.
Check your TV owner's manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact Customer Service.
TV Weight Limit
(including accessories)
DO NOT EXCEED
Wall
Construction
ONLY install on these
acceptable wall types.
CAUTION:
DO NOT
install in
drywall alone
Drywall alone will
NOT
the weight of your TV
Unsure
Call Customer Service
Tools Needed
2
IMPORTANT SAFETY INSTRUCTIONS
110 lb
(49.8 kg)
wood studs
hold
ACCEPTABLE
Tape Measure
Pencil
Stud
Awl
Finder
Solid concrete
or concrete
block
ACCEPTABLE
Concrete kit #CMK1 is
required [NOT INCLUDED]
Call Customer Service
Level Tape
3/8 in.
7/32 in.
(10 mm)
(5.5 mm)
Concrete
Wood
Drill Bit Drill Bit
If your TV (plus accessories) weighs MORE,
this mount is NOT compatible.
Visit Accents.SANUS.com or call customer
service to find a compatible mount.
steel studs
ACCEPTABLE
Steel stud kit #SSMK1 is
required [NOT INCLUDED]
Call Customer Service
Screwdriver Electric Drill
Stud
Hammer Awl
Finder
1/2 in.
(13 mm)
Socket Wrench
1/2 in.
(13 mm)
Steel
Drill Bit