MyBinding HSM Pure 830c Level P-4 Manual De Instrucciones página 17

english
10 Technical data
Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity * (sheets), A4
Weight
Cutting speed
Intake width
Power supply
Power consumption
with max. number of sheets
Operating mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
Sound pressure level emissions
(Idle running/ load)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The per-
formance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage or a
different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during operation.
The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
This document shredder meets the applicable harmonisation legislation of the European Union:
• Low Voltage directive 2014/35/EU
• EMC directive 2014/30/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
16
Strip cut
P-2, O-2, T-2, E-2
80 g/m 42 - 44
2
70 g/m 2 47 - 49
74 kg
230 V, 50 Hz
HSM Pure 830
3.9
110 mm/s
330 mm
120 V, 60 Hz
1.300 W
Continuous operation
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
579 x 548 x 954
150 l
55 dB(A) / 60 dB(A)
Cross cut
4.5 x 30
P-4, O-3, T-4, E-3, F-1
33 - 35
39 - 41
78 kg
220 V, 60 Hz
12/2016