Publicidad
Idiomas disponibles
Idiomas disponibles
TENSOR SERIES ACTIVE SUBWOOFER
The HH TENSOR engineered in the UK to deliver power, performance and reliability.
The Class-D amplifier delivers impressive output performance in an optimally ported yet compact wooden enclosure. The active
variable crossover allows adjustable tuning at lower frequencies and two acoustically tuned audio modes provide solutions for a
multitude of applications. Dual balanced XLR inputs support stereo line level input which can be easily be daisy chained to other
TENSOR subwoofers (or other suitable devices). Balanced XLR high-pass outputs allow for direct connection to Full-Range and
HF loudspeakers without the need for complex crossovers or EQ. Comprehensive on-board protection reduces the risk of
electronic overload resulting in damage to internal components. All enclosed in an acoustically treated lightweight wooden
enclosure, with acoustic foam backed steel front grille, a front LED logo and 35mm pole mount.
The HH TENSOR – delivering performance and reliability.
GETTING STARTED
This manual contains important information regarding correct and safe operation of your TENSOR system. Please read it thoroughly
in order to get the best performance and reliability from your HH product.
Inspect the product during unpacking If any damage is found notify the dealer you purchased it from immediately. Should you ever
need to return the unit back to the dealer or HH Electronics, ensure it is well packed and if possible use the original packaging.
POWER CYCLE
Many products have large transient surges at turn on and off which can cause damage to your speakers.
Following the sequence below for power-up and the reverse for power down will prevent this from occurring.
1
POWER
POWER SWITCH - OFF
4
CONNECT INPUT SIGNAL
© 2021 HH Electronics Ltd
2
CONNECT POWER
5
POWER
POWER SWITCH - ON
Designed and Engineered in the UK by HH Electronics LTD.
3
SET VOLUME TO MINIMUM
6
SET VOLUME AS REQUIRED
2
Publicidad
