Basic Information; Intended Use; Improper Use; Safety Measures - Hoffmann GARANT HiPo Clamp Manual De Instrucciones

2.

Basic information

This vice is constructed according to the state of the art and is operationally
reliable.
Nevertheless, hazards may arise if the device is not operated by trained or,
at the very least, instructed personnel, and/or if it is used other than for its
intended purpose.
Therefore, the instruction manual and safety instructions must be read prior
to commissioning in order to:
Use all the advantages offered by the vice
▶
Ensure problem-free use
▶
Avoid accidents
▶
You are also responsible for the safety, accuracy and efficiency of this vice.
2.1

Intended use

Positioning and clamping of workpieces on machines for cutting and
non-cutting machining.
Only rigid, deformation-resistant workpieces must be clamped.
When clamping with grip (partial penetration of the clamping jaws into the
material), the clamping force can be reduced significantly.
2.2

Improper use

Crushing, pressing and compressing of materials and workpieces or any
other use not covered by the clamp's intended purpose.
Hazards when working with the vice:
Crushing of fingers when clamping workpieces
▶
Danger due to flying swarf when cleaning with compressed air
▶
Danger due to detached workpieces when machining
▶
Danger due to falling workpieces in case of vertical arrangement
▶
Injuries due to sharp corners and edges
▶
Danger due to incorrect transport
▶
2.3

Safety measures

For maintenance, repairs, troubleshooting:
Release clamp prior to disassembly
▶
In normal use:
To ensure proper functioning of the vice, it must be correctly and
▶
securely attached to the machine.
www.hoffmann-group.com
DE
EN
FR
IT
ES
17