Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
10
English
Untitled-1 10
A
B
B
A
A
A
11. Insert the ice maker into the front side
of the grommets (A) as shown. Then,
push the ice maker (B) inwards to the
end. To prevent deviation of the ice
maker, make sure the ice maker fits into
position.
12. Tighten the provided screws (x2) to
attach the ice maker (A) firmly to the
refrigerator.
- Make sure the screw holes are
aligned with each other before
tightening the screws.
13. Put the ice bucket (A) on the shelf as
shown. By design, the ice bucket (A) is
supposed to sit behind the ice maker.
Otherwise, the ice cubes from the ice
maker will not collect in the bucket as
intended.
14. Unscrew the screws to remove the
compressor compartment cover (A) at
the back of the refrigerator.
WARNING
Be careful not to get a cut on your
hands when removing the compressor
compartment cover (A).
2021-09-06
10:47:01
Publicidad
