Publicidad
Idiomas disponibles
Idiomas disponibles
5. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
Connecting the Poles
1. Slide the middle pole into the lower pole assembly.
Align the screw holes (Fig. 4).
Fig. 4
Lower pole
assembly
2. Insert the bolt through the square hole in the pole and
secure the other end with the joint-fixing knob (Fig. 5).
Twist until tight.
NOTE: You may have to carefully move the wiring inside
the tube to one side if it blocks the path of the bolt.
Fig. 5
Joint-fixing
knob
3. Slide the upper pole assembly onto the middle pole.
Align the screw holes (Fig. 6).
Middle pole
Bolt
10
Fig. 6
Upper pole
assembly
Middle pole
4. Insert the bolt through the square hole in the pole and
secure the other end with the joint-fixing knob (Fig. 7).
Twist until tight.
Fig. 7
Joint-fixing
knob
Operation
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless snow shovel you will need
a iON+ 24V System battery and charger. See page 14 for
battery and charger options and specifications, or for more
information visit snowjoe.com.
m
WARNING!
Keep the area to be cleared free of stones,
toys or other foreign objects that the rotor blades might pick
up and throw. Such items could be covered by snow and are
easy to overlook, so be sure to conduct a thorough inspection
of the area before beginning work.
Square hole
Bolt
Publicidad
