Domo DO8126 Manual De Instrucciones página 27

ASSEMBLY
1. Turn the fan upside down and put it on a soft surface, so that the control panel can not
get damaged.
2. Click the 2 parts of the base together.
3. Make sure that the part of the base with the cord guide is situated at the back of the fan.
Lead the cord through the cord guide.
4. Place the base on the bottom of the fan, place the plastic nut and fasten onto the base.
5. Turn the fan upside down again. The appliance is now ready for use.
Remote control
Place 2x AAA batteries into the battery compartment at the back of the remote control.
USE
You can control the fan with the buttons on the control panel as well as with the buttons on
the remote control.
Place the fan on a flat, stable surface. Plug it in.
Switch on the fan by pressing the ON/OFF button. Switch off the fan by pressing the ON/OFF
button for a second time.
www.domo-elektro.be
27
DO8126