Publicidad
Idiomas disponibles
Idiomas disponibles
English
To Install the Battery Packs
1. Lift and hold the battery port cover
battery ports
25
.
2. Slide a battery pack into the battery port until an audible
click is heard. Repeat for the second battery
nOTE: Ensure the battery packs are fully seated and fully
latched into position before starting mower.
3. Close the battery port cover. Ensure the cover is fully
closed before starting mower.
To Remove the Battery Packs
1. Lift and hold the battery port cover up to expose the
battery ports.
2. Depress the battery release buttons
packs and pull the battery packs out of tool.
Safety Key (Fig. L)
DANGER: Sharp moving blade. In order to prevent
accidental start‑up or unauthorized use of your
cordless mower, a removable safety key
incorporated into the design of your mower. The mower
will be completely disabled when the safety key has
been removed from the mower.
DANGER: Rotating blades can cause serious
injury. To prevent serious injury, turn unit off and
remove safety key and battery packs when unattended,
or when charging, cleaning, servicing, transporting,
lifting, or storing mower.
Starting Mower (Fig. K–N)
DANGER: Sharp moving blade. Never attempt
to override the operation of the switch box and
safety key system as serious injury could result.
WARNING: Ensure self drive is disengaged before
starting the mower
nOTE: Mower is operational when battery packs and safety
key are installed.
1. Lift and hold the battery port cover
battery port
25
.
2. Slide a battery pack into the battery port until an
audible click is heard. Repeat this process for the second
battery port.
nOTE: Ensure the battery packs are fully seated and fully
latched into position before starting mower.
3. Close the battery port cover. Ensure the cover is fully
closed before starting mower.
4. Insert safety key
3
into the ON‑OFF switch box
until it is fully seated inside housing. The mower is
now operational.
5. Your mower is equipped with a special ON‑OFF switch
box. To operate the mower, push and hold the ON‑OFF
button
2
on the ON‑OFF switch box, then pull the bail
handle
5
to the main handle
nOTE: Once the mower starts you can release
the ON‑OFF button, but you must continue to hold the
bail handle to the main handle for the mower to run.
6. To turn the mower OFF, release the bail handle.
14
10
up to expose the
26
on the battery
3
has been
10
up to expose the
1
4
.
WARNING: Never attempt to lock a switch or bail
handle in the ON position.
nOTE: Once the bail handle has returned to the original
position it will activate the "Automatic Braking Mechanism".
The motor is braked and the mower blade will stop rotating
in three seconds or less. If mower blade rotates longer than
three seconds, discontinue using mower and have it serviced.
Variable Speed Self Drive System (Fig. N)
DANGER: Sharp moving blade. Never attempt to
override the operation of the switch box, the self
drive system or the safety key system as serious
injury could result.
Your mower is equipped with variable speed self drive. This
system is dependent on the blade ON‑OFF switch. It can only
be used with the blade spinning.
1. Follow starting Mower instructions.
2. To turn on self drive, hold blade bail handle
against the main handle
3. Pull the self drive speed lever
with your other hand.
4. You can hold just the speed lever or hold both bail
handle and speed lever simultaneously.
5. To turn off self drive, release the speed lever.
nOTE: When you turn off the self drive, for example at the
end of a row, the wheels may become temporarily locked
if you pull backwards on the mower. Simply push ahead
slightly and then move the mower as required.
nOTE: During cutting, at times it may be easier to maneuver
around an object , such as a tree or plants, with the self drive
off. The mower can easily be used with the self drive off.
Variable Speed Ajustment Wheel (Fig. N)
Your mower is equipped with a variable speed adjustment
wheel
27
located on the bottom of self drive housing
This system adjusts how quickly or slowly the self drive
system propells the mower.
1. To increase the speed of the self drive system, rotate
the variable speed adjustment wheel in the direction
indicated by the arrow located next to the variable speed
adjustment wheel.
2. To decrease the speed of the self drive system, rotate
the variable speed adjustment wheel in the opposite
direction indicated by the arrow located next to the
variable speed adjustment wheel.
Mower Overload
To prevent damage due to overload conditions, do not try to
remove too much grass at one time. Slow down your cutting
pace, or raise the cut height.
Mowing Tips (Fig. A)
WARNING: ALWAYS INSPECT AREA WHERE
MOWER IS TO BE USED AND REMOVE ALL STONES,
STICKS, WIRE, BONES, AND OTHER DEBRIS WHICH
MIGHT BE THROWN BY THE ROTATING BLADE.
WARNING: Mow across the face of slopes, never
up‑and‑down. Exercise extreme caution when
5
in place
4
with one hand.
6
toward the main handle
28
.
Publicidad
