Reelcraft LP82000 OLP Instrucciones De Operación

Operating Instructions
Series LP80000 / LPD80000
Spring Driven Hose Reels
LP82000 OLP LP83000 OLP
LPD83000 OLP LPD84000 OLP
IMPORTANT
Read this manual carefully before installing,
operating or servicing this equipment.
B
Personal Safety
Personal injury and/or equipment damage
may result if proper safety precautions are
not observed.
• Ensure that reel is properly installed
before connecting input and output
hoses.
• Bleed fluid/gas pressure from system
before servicing reel.
• Before connecting reel to supply line,
ensure that pressure does not exceed
maximum working pressure rating of
reel.
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com
Dimensional Data
C
D
A
• Remember, even low pressure is very
dangerous and can cause personal in-
jury or death.
• Be aware of machinery and personnel
in work area.
• If a leak occurs in the hose or reel, re-
move system pressure immediately.
• A high tension spring assembly is con-
tained within the reel. Exercise extreme
caution.
Part # A
LP82000 OLP
25.375"
LP83000 OLP
25.375"
E
F
LPD83000 OLP
25.375"
LPD84000 OLP
25.375"
B C D E
24" 10 6" 15.375"
24" 10 6" 15.375"
24" 10.5" 7.875" 17.75"
24" 10.5" 7.875" 17.75"
• Pull hose from reel by grasping the
hose itself, not the control valve.
• If reel ceases to unwind or rewind,
remove system pressure immediately.
Do not pull or jerk on hose!
• Treat and respect the hose reel as any
other piece of machinery, observing all
common safety practices.
Form# 1161-1004 Rev: 5/2018
F
9.375"
9.375"
9.375"
9.375"