Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Sound system
Remote Control
PAIR
EQ
PAIRING YOUR DEVICE FOR THE FIRST TIME
1. Power on the unit by pressing the Power button.
2. Set the indicator to BL by either scrolling the source selection button on the panel or pressing the PAIR
button on the remote control.
The pairing indicator will flash blue quickly. When pairing, remain within 3 feet of the unit.
3. Use the controls of your device to select "Fireplace" bluetooth name to pair the devices.
4. If your device requests a password, enter the default password 0 0 0 0.
5. When successfully paired and connected, a beep will issue from the sound system and the Pairing
Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device. The devices may also unpair if devices are too far apart.
6. If your device should become unpaired or you find it is unable to connect, repeat the above steps.
CONTROL PANEL
AND REMOTE CONTROL:
The sound system settings
can be adjusted with the
control panel and/or the
sound system remote control:
ACCESSORIES
DC Adaptor
Power Cable
Optical Cable
11
PLAY/PAUSE
VOLUME UP
VOLUME DOWN
SCROLL SOURCE OPTIONS
SCROLL EQ SETTINGS
Control Panel
ON/OFF
Publicidad
