Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING: To reduce the risk of burns, electrocution, fire, or
injury to persons:
1. When not in use, unplug the iron. Allow it to cool and store in a
safe, dry location.
2. This iron is hot when in use. Do not let eyes or bare skin touch
heated surfaces.
3. Do not place the heated iron directly on any surface while it is hot,
other than a thermal mat.
4. Never leave the appliance unattended while plugged in.
5. Close supervision is necessary when this appliance is used by,
on, or near children or individuals with certain disabilities.
6. This iron is intended to be used only on head hair.
7. Use this appliance only for its intended use as described in
this manual.
8. Never operate this appliance if it has a damaged cord or plug.
9. Never allow the power supply cord to be pulled, jerked, strained,
twisted, or severely bent, especially at the plug connections. The
foregoing may damage the cord, including at or near the high flex point
of entry into the appliance, causing it to rupture and short. Handle the
cord carefully for longer life.
10. Keep the cord away from heated surfaces. Do not wrap the cord
around the appliance.
11. Never drop or insert any object(s) into any opening in the appliance.
12. Do not use outdoors or operate where aerosol spray products are
being used or where oxygen is being administered.
13. Do not use an extension cord with this appliance.
14. Never use while sleeping.
15. Do not operate with voltage converter.
16. This appliance is provided with a protective device that may make it
inoperable under some abnormal conditions (such as immersion of
the appliance).
17. If appliance is not working properly, return it to Customer Service for
examination and possible replacement under warranty.
18. While heating or cooling the appliance, never place it on a soft surface,
such as a bed, couch, or carpet.
19. Do not use hot plates near eyes, skin or other heat sensitive areas.
20. Do not leave iron in hot humid places.
21. Discontinue use immediately and unplug if iron becomes too hot or
malfunctions in any way.
3
Publicidad
