Samsung HW-T400 Manual página 15

Step 2. Change the Soundbar's mode to D.IN
W
Auto Power Link
This Function automatically turns on the Soundbar when the TV is turned on if the Soundbar is
connected to the TV by an Optical Cable (not supplied).
Press and hold the
• Auto Power Link is set to ON by default.
• Depending on the connected device, Auto Power Link may not function.
• This function is only available in the "D.IN" mode.
Mode
OFF
ON
button on the remote control for more than 5 seconds to toggle this function.
Remote control Button
5 Sec
5 Sec
Right Side of the Soundbar
LED indicator
Blinking
W W
Blinking
W W
ENG - 15
(OR)
R
G