Danby DFF180E1BSS Manual Del Propietário página 6

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in
to avoid damage to the internal components.
1. Remove the cover plate on the top left side of the
cabinet. Remove the hinge cover and the upper
hinge from the top left side of the cabinet.
2. Lift the freezer door upwards to remove it from
the cabinet. Remove the center hinge. Lift the
refrigerator door upwards to remove it from the
cabinet.
3. Remove the lower hinge from the bottom right
side of the cabinet. Unscrew the hinge shaft from
the right side of the lower hinge and move it to
the left side of the lower hinge. Install the lower
hinge on the left side of the cabinet.
4. Remove the hinge sleeves from the top right side
of the refrigerator and freezer doors. Remove
the hole covers from the top left side of the
refrigerator and freezer doors. Insert the hole
covers in the holes on the top right side of the
doors. Insert the hinge sleeves in the holes on the
top left side of the doors. Remove the self-locking
block and the door stopper from the bottom
right side of the freezer door and install it on the
bottom left side of the freezer door. Remove the
door stopper from the bottom right side of the
refrigerator door and install it on the bottom left
side of the refrigerator door.
1
2
3
4
5