Publicidad
Idiomas disponibles
Idiomas disponibles
1A. Attach Caster Wheels (#9 & #10) to Caster Beam. Slide a Caster Wheel with
Lock (#10) through Caster Beam (#8) and secure it with a Push Nut (#11) as
shown in Figure 1. Gently tap the Push Nut (#11) with a hammer to secure it in
place. On the other end of the Caster Beam attach a Caster Wheel without Lock
(#9). Make sure you have one Caster Wheel with Lock and a Caster Wheel
without Lock for each Caster Beam. Repeat step for second Caster Beam.
1B. Attach Tube Plugs (#14) to Caster Beam (#8) as shown in Figure 1.
10
2. Lay Support Plates (#43) on Caster Beam (#8) to line up holes, the distance
between middle holes to side holes is different, see Front View of Figure 2.
Attach Stop Spools (#12) and Support Plates (#43) to side of Caster Beam
without logo with Bolts (#13) and Nuts (#28) but do not tighten completely.
See Figure 2.
Repeat step for second Caster Beam.
13
Figure 2
8
Figure 1
8
12
43
28
9
10
Match holes in Support Plate (#43)
Longer
15
"
1
64
3
11
14
with Caster Beam (#8).
8
43
11
11
1
64 "
1
64 "
Shorter
Shorter
Front View
Longer
15
1
64 "
10
Publicidad
