Descargar Imprimir esta página

YATO YT-85910 Manual De Instrucciones página 13

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 61
PRODUCT OVERVIEW
The pressure washer is a device designed for cleaning various materials: stone, wood, metal and plastics, using a high-pressure
water jet. The washer may only be used outdoors and must not be used indoors. The correct, reliable and safe operation of the
device depends on its proper use, therefore:
Read and keep the entire manual before the fi rst use of the device.
The supplier shall not be liable for any damage resulting from failure to comply the safety instructions and recommendations
specifi ed in this manual.
ACCESSORIES
The product is delivered complete but requires assembly before operation. The set does not include a hose for connecting the
washer to the water source.
SPECIFICATION
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Max. water pressure
Rated water pressure
Water consumption
Max. lance pressure
Max. lance capacity
Max. lance water temperature
Max. hose pressure
Max. hose water temperature
Feed water pressure (min. – max.)
Max. feed water temperature
Max. nozzle recoil
Ingress protection rating
Noise level - sound pressure L
± K
pA
Noise level - power L
± K
wA
Vibration level
Protection class
Weight
SAFETY INSTRUCTIONS
Caution! Read all of the following instructions. Failure to do so may result in electric shock, fi re, or personal injury.
FOLLOW THE INSTRUCTIONS BELOW
Intended use
This product consists of a water pump and an electric drive. The lance is connected to the water pump via a hose. The water jet
from the lance removes stubborn dirt with high water pressure and with the possible addition of cleaning agents. The water used
to feed the machine must be clean and free of any mechanical or chemical impurities.
High pressure generates a high velocity water jet at the outlet of the cleaning nozzle or spray head. As a result, even the most
stubborn dirt or paint layers can be removed. The washer can be used to clean
terrace slabs, pavements, façades and vehicles.
The water fl ow at the outlet of the nozzle is very sharp, so there is an increased risk of accidents and damage to the cleaned surface.
The device may only be used at temperatures above 0
Improper use
The pressure washer must not be used for the following purposes: spraying hot water (above 50
ment; as a pump; spraying fl ammable liquids; spraying liquids other than water. Do not use the device to spray sea water.
C.
O
O R I G I N A L
GB
Units
[V~]
[Hz]
[W]
[MPa]
[MPa]
[l/min.]
[MPa]
[l/min.]
[
C]
o
[MPa]
[
C]
o
[MPa]
[
o
C]
[N]
[dB] (A)
[dB] (A)
[m/s
2
]
[kg]
I N S T R U C T I O N S
Value
YT-85910
230 – 240
50
1400
10.5
7.0
5
20
10
60
16
60
0.15 – 0.30
50
14.83
IPX5
88.43
95.23
≤ 2.5
II
6.5
C); cleaning electrical equip-
O
13

Publicidad

loading