Publicidad
Idiomas disponibles
Idiomas disponibles
Care and Cleaning
Internal Water Tank
The Water Full indicator ("FL" on the control panel
filled with condensed water.
1. Unplug or disconnect power.
below the lower drain located on the back (near the
3. Remove the cap and the rubber plug and drain the
water tank.
4. Re-insert the drain plug and screw the cap snugly into
place.
5. Plug in or reconnect power.
Storage
If the unit is not being used for a long period of time:
To Empty the Internal Water Tank:
1. Unplug or disconnect power.
How to Insert the Batteries in the Remote Control
1. Remove the battery cover by sliding it according to the
arrow direction.
of battery are installed correctly.
3. Reattach the cover by sliding it back into position.
8
3. Use the original packaging to repack the unit to avoid
a buildup of dust or dirt.
4. Store the air conditioner in a cool, dry location.
NOTES:
rechargeable batteries.
system is not going to be used for a long time.
49-5000612 Rev. 2
Publicidad
