Descargar Imprimir esta página

Remington RM4110 Manual Del Operador página 8

Cargador de baterías de ion de litio

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING:
To prevent serious injury, always unplug the
battery charger from the power outlet before performing
cleaning or maintenance.
MAINTAINING THE BATTERY CHARGER
Keep the battery charger clean and clear of debris. Do not allow
foreign material into the charging dock or onto the terminals (Fig. 5).
Inspect the battery charger for foreign material before each use.
Make sure the charger has not been shorted by debris. Inspect
the terminals for soot and signs of melting. Do not attempt to
use a shorted charger.
CLEANING
WARNING:
To prevent serious injury, always unplug the
battery charger from the power outlet before performing
cleaning or maintenance. Always allow the battery charger
to cool before cleaning the battery charger.
WARNING:
To prevent serious injury, do not use water to
clean the battery charger. Do not douse the battery charger
with water. Do not submerge the battery charger in water or
any other liquid. Do not use strong detergents. Household
cleaners that contain aromatic oils such as pine and lemon,
and solvents such as kerosene, can damage plastic.
Use a small brush or clean, dry cloth to clean the outside of the
battery charger.
PROBLEM
THE BATTERY WILL NOT CHARGE
The battery charger is not plugged in
The battery is not fully inserted into the battery charger
The battery and/or charger are too hot or too cold
The battery and/or battery charger are no longer functional
MAINTENANCE
CLEANING AND STORAGE
STORAGE
Always unplug the battery charger when it is not in use.
Thoroughly clean the battery charger and inspect it for any loose
or damaged parts.
Lock up the battery charger to prevent unauthorized use or
damage.
Store the battery charger indoors, in a dry, well-ventilated area.
Store the battery charger in an area that is between 65 and 75˚ F
(18 and 24˚ C).
Store the battery charger out of the reach of children.
TROUBLESHOOTING
SOLUTION
Plug the battery charger into a 120V 60hz AC source
Remove and then reinsert the battery into the battery charger
completely
Make sure the battery and charger are in an environment between
32° and 104° F (0° and 40° C). Allow time for the battery and/or
charger to warm up or cool down.
Refer to the Warranty section for replacement information
8
Charging Dock
Fig. 5
Terminals

Publicidad

loading