Publicidad
Idiomas disponibles
Idiomas disponibles
Untitled-1 35
7. Remove the two screws that hold the
lever holder in place, and then remove
the lever holder.
8. Re-insert the two screws that held the
lever holder into the same screw holes,
and then tighten.
9. Remove the single screw from the back
of the door hinge.
NOTE
This is the screw that supports the door
against the frame so you can unscrew or
screw in the hinge without needing to
support the door yourself.
10. Insert the screw you just removed into
the other screw hole on the back of the
door hinge, and then tighten.
English 35
2020-12-07
11:00:14
Publicidad
