OPERATING INSTRUCTIONS
TEMPERATURE SELECTION
The refrigerator control panel is located on the
rear wall of the refrigerator compartment. This dial
controls the temperature of both the refrigerator
and freezer compartment. The dial in the freezer
compartment is used to balance the cold air
distribution between the two compartments.
Turn the dial in the refrigerator compartment to
choose the desired setting.
Turn the dial in the freezer compartment to allow
more or less cold air into the freezer compartment.
Internal temperature of the appliance can vary
based on ambient temperature, the quantity of items
stored and how frequently the door is opened.
MIN
HUMIDITY CONTROL
There is a humidity control gauge on the crisper
that can be used to control the level of humidity
inside the crisper. The single water drop indicates
less humid conditions. The three tear drops indicate
more humid conditions.
LEVELING INSTRUCTIONS
There is an adjustable leg on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as
2. Slowly turn the leveling leg clockwise until the
MAX
4
it will go, until the top of the foot is touching the
bottom of the cabinet.
appliance is level.