Publicidad
POWER
Operation starts when this button is pressed and stops when you
press the button again.
FAN SPEED SELECTOR
Use to set the fan speed to
ON/OFF TIMER
Delay ON
- when the air conditioner is off, it can be set to automatically turn
on from 1 to 24 hours at its previous mode and fan settings.
Delay OFF - when the air conditioner is on, it can be set to automatically turn
off from 1 to 24 hours.
OPERATION MODE SELECTOR
Everytime you push this button， it will toggle between Cool, Energy Saver, Fan, and Heat.
Cool - Compressor runs and cools the room. Use the
set the desired temperature and circulation fan speed.
Energy Saver
- The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and check the room air
temperature if cooling is needed.
Fan
- Fan circulates air but compressor does not run. Use the FAN button to set
the desired fan speed.
Low (F1), High (F2).
REMOTE CONTROLLER
Power
Temp
Fan Speed
Timer
Mode
and FAN buttons to
Publicidad
