Boost -STUPDJ Manual De Uso página 3

Remote Control
1. Power on/off
2. Mute
3. Repeat key (single repeat, repeat all)
4. Mode key (Choose from AUX/USB/SD/BLUETOOTH/FM)
5. 0-9 keys
6. Sound mode key (Choose from rock, pop, jazz)
7. Record key (Press to start and again to stop recording)
8. Play/pause (the sound will be muted when paused)
9. Volume-
10. Volume+
11. Previous song
12. Next song
Use of the Remote Control
Please operate the remote control within a distance of 6m and 30° between the remote and the appliance.
Aim the remote at the sensor. Remove all obstacles between the remote and the sensor.
The remote control might not work properly if the sensor is exposed to strong sunshine.
If the remote control doesn't work properly, please check the batteries.
Top Panel Description
1. AUX INPUT (connect the supplied lead for FM reception)
2. Main Volume control
3. TREBLE
4. BASS
5. ECHO
6. MIC.VOL
7. MIC. EQ
8. FM ANTENNA
9. USB /SD CARD INPUT
10. POWER SWITCH (POWER ON/OFF)
11. MODE (SWITCH TO USB/SD/
BLUETOOTH/FM/AUX-IN)
12. PLAY (PLAY/PAUSE MUSIC)
13. NEXT (NEXT SONG)
14. PREV (PREVIOUS SONG)
15. LED ON/OFF (TURN ON/OFF LED)
16. REC (RECORD TO USB/SD CARD)
17. CHARGING INPUT JACK (AC INPUT):
Charging led is on during charging process
18. MIC INPUT (TO INSERT WIRED MIC)
Wireless Microphone
1. Open battery cover and insert a battery according to the + and – markings inside the compartment.
2. Turn on the microphone. If the power indicator doesn't flash nor lights up steadily check if the
battery is charged and if it has been inserted with the correct polarity.
3. Adjust the volume of the wireless microphone when you sing.
4. If the power indicator flashes when you switch on the wireless microphone, the battery is low and
©Copyright LOTRONIC 2016 BOOST-STUPDJ 3