Publicidad
Idiomas disponibles
Idiomas disponibles
DIGA.book Seite 15 Donnerstag, 5. Oktober 2006 2:01 14
Intended Use
DIGA CS-1: The unit is intended to fasten bolts (fas-
teners) in concrete, solid lime-sand stone, solid brick
wall and steel, when using original Würth system
accessories.
DIGA WO-1/21, DIGA WO-1/34: The unit is in-
tended for setting nails in wood materials when us-
ing original Würth system accessories.
For damage caused by usage other then intended,
the user is responsible.
Bolt-firing Tool
Article number
Shooting capacity (max.)
Brad-length x brad-Ø (max.)
Magazine capacity
Dimensions
(height x length x width)
Weight
Gas Cartridge
Article number
Quantity
Contents
Danger classification
Max. ambient temperature
Spare energy capacity
Power Supply
Input voltage/current
Output voltage/current
Charger
Input voltage/current
Output voltage/current
Charging time
battery empty
initial starting of operation
Battery
Rated voltage
Capacity
Ambient temperature
Spare energy capacity
(battery fully charged)
All manuals and user guides at all-guides.com
The bolt-firing tool DIGA is equipped with a com-
bustive power source, for which an explosive gas
mixture is ignited and a piston for driving in the fas-
tening bolt/brad is powered.
The combustion process produces exhaust gas and
noise emissions that can be harmful to one's health.
The specified safety measures are to be observed.
Due to the design of the tool, it is not classified as a
fastening tool in accordance with class A of BGV. It
is recommended to observe BGV A.
Tool Specifications
DIGA CS-1
0864 90
1000/h
38 x 2.6 mm
4 x 10 pcs.
389 x 440 x 106 mm
3.59 kg
Functional Principle
DIGA WO-1/21
DIGA WO-1/34
0864 92
0864 93
1000/h
1000/h
90 x 3.1 mm
90 x 3.1 mm
30 pcs./1 strip
40 pcs./1 strip
379 x 382 x 111 mm
340 x 391 x 110 mm
3.55 kg
3.55 kg
864 900 0 ...
80 ml
Isobutene/Propane
2.1 UN 1950 F+
50 °C
approx. 1100 shots
100 - 240 V≈/0.4 A
12 V =/1.2 A
12 V =/1.2 A
10 V =/0.8 A
120 min
24 h
NiMH
6 V =
1.5 Ah
5 - 50 °C
approx. 3000 shots
15
Publicidad
