Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLE SHOOTING Continued
CHECKING Practices:
How often, how much and when are you adding
fluid? A full container of fluid should be added
immediately when the add/low fluid light comes
on. The system is designed to warn users at the
point at which fluid should be added. Please
keep in mind that the light will remain while fluid
is low, and more fluid will be needed to reach
the proper operating level.
When did you notice the change in usage? If
fluid usage has been fine for a period of time
and usage has just recently increased, check to
see if anything has changed recently. (New
employees, more employees, more parts being
cleaned, longer hours of use, etc.)
How many hours a day do you have the pump
running? The more the pump runs, the more
evaporation occurs. Never leave the pump
running when the SmartWasher is not in use.
How many operators and how many hours a
day are you using the SmartWasher? This will
help you determine if they have high, normal or
low usage. If you have higher than normal
usage, you will have higher fluid usage.
Does the OzzyMat clog up and cause the fluid
to pool up in the sink? If the fluid is backing up
in the sink and not draining through the Ozzy-
Mat properly, there will be increased evapora-
tion and the low fluid light may come on prema-
turely because the fluid is in the sink, not in the
base.
Are operators squeezing the excessive fluid
out of the OzzyMat into the sink after installing
a new OzzyMat? When changing out the old
OzzyMat, squeeze out any excessive fluid.
ChemFree Technical Support : 800-521-7182 www.chemfree.com
ISSUE - Low or No Fluid from
Brush or Nozzle
Check the following:
Make sure that the valves at the base
of the nozzle and brush are open. If a
stronger flow through either device is
needed, turn the valve on the unused
tool to the closed position.
Hoses from the pump to the nozzle and
brush could be clogged, pinched or
disconnected. Check the hoses from
the pump to the nozzle making sure
they are in working order.
Make sure SmartWasher is not low on
fluid.
Hose connections should be secure
and not leaking.
The pump comes with a one year
factory warranty. If the pump is faulty,
call your local distributor or ChemFree
Technical
Support
warranty replacement. Have the serial
number of the SmartWasher unit
available when calling.
CONTACT CUSTOMER SERVICE
with additional questions:
800-521-7182
www.chemfree.com
770-564-5580 (P)
770-564-5533 (F)
ChemFree Corporation 8 Meca Way Norcross, GA 30093
SmartWash
r e
Ozzy
®
Operating Manual
to
order
your
®
8
Publicidad
