Publicidad
Idiomas disponibles
Idiomas disponibles
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Wear Safety Footwear
Wet Conditions Alert
No Slope
FEATURES
KNOW YOUR SNOW THROWER ATTACHMENT
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all oper-
ating features and safety rules.
ASSEMBLY
UNPACKING
This product requires assembly.
n Carefully remove the items from the box. Make sure that
all items listed in the Packing List are included.
WARNING:
Do not use this product if any parts on the Packing
List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the
product by the manufacturer and require customer in-
stallation. Use of a product that may have been improp-
erly assembled could result in serious personal injury.
n Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
n Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
n If any parts are damaged or missing, please call
1-800-776-5191 for assistance.
PACKING LIST
Snow Thrower Attachment
Operator's Manual
NAME
Wear non-slip safety footwear when using this equipment.
Do not expose to rain or use in damp locations.
Do not operate on inclines greater than 15º. Walk across the face
of slopes, never up and down.
5 – English
DESIGNATION/EXPLANATION
PRODUCT SPECIFICATIONS
Clearing Width . ........................................................... 12 in.
Clearing Depth ................................................... Up to 6 in.
Impeller Diameter ......................................................... 6 in.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create ac-
cessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible seri-
ous personal injury.
WARNING:
Do not connect to power head until assembly is com-
plete. Failure to comply could result in accidental start-
ing and possible serious personal injury.
Publicidad
