Kenwood KDC-268U Manual De Instrucciones página 4

GETTING STARTED
1
Select the display language and cancel the
demonstration
When you turn on the power (or after you reset the unit), the
display shows: "SEL LANGUAGE" "PRESS" "VOLUME KNOB"
1
Turn the volume knob to select [ENG] (English) or [SPA]
(Spanish), then press the knob.
[ENG] is selected for the initial setup.
Then, the display shows: "CANCEL DEMO" "PRESS"
"VOLUME KNOB".
2
Press the volume knob.
[YES] is selected for the initial setup.
3
Press the volume knob again.
"DEMO OFF" appears.
2
Set the clock and date
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [CLOCK], then press the knob.
To adjust the clock
3
Turn the volume knob to select [CLOCK ADJUST], then press the
knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour Minute
5
Turn the volume knob to select [CLOCK FORMAT], then press the
knob.
6
Turn the volume knob to select [12H] or [24H], then press the
knob.
4
ENGLISH
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11 Press and hold to exit.
To return to the previous setting item, press
3
Set the initial settings
1 Press repeatedly to enter STANDBY.
2 Press the volume knob to enter [FUNCTION].
3 Turn the volume knob to select an item (see the following table), then press
the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press
AUDIO CONTROL
SWITCH PREOUT REAR/SUBWOOFER or REAR/SUB-W: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external amplifier). ( 21)
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or 4 inches,
6×9 inches or 6 inches) or OEM speakers for optimum performance.
DISPLAY
EASY MENU (For
When entering [FUNCTION]...
ON: ZONE 1 illumination changes to white color. ;
OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 15)
• ZONE 2 illumination changes to white color when you enter [FUNCTION],
irregardless of the [EASY MENU] setting.
• Refer to the illustration on page 14 for ZONE identification.
.
.
)
Default: XX