Dometic WAECO MagicComfort MSH200 Instrucciones De Montaje página 25

MagicComfort MSH200
7 Using the seat heater
NOTE
I
The seat heating logo (fig. k 1, page 6) also lights up when the
seat heating is switched on.
➤ Adjust the seat heating from 0 to H (high output) using the rotary wheel of
the accompanying switch.
✓ The LED (fig. k 2, page 6) on the switch lights up green.
➤ To switch the seat heater off: Turn the corresponding switch to position 0.
✓ The LED (fig. k 2, page 6) on the switch goes out.
8 Guarantee
The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
 A copy of the receipt with purchasing date
 A reason for the claim or description of the fault
9 Disposal
➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
EN
Using the seat heater
25