Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION FOR USE
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the proce-
dure below.
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen, press the POWER
button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel) ▲ or ▼ button to point to "[ENG]".
5) Select "ENG(lish)", "ESP(añol)" or "FRA(nçais)" by using
the VOL(ume) ▲ or ▼ button.
6) Press the MENU button to exit the menu.
CHANNEL PRESETTING
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears
on the TV screen.
3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to "AUTO PRESET CH".
Then press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in your area.
The TV distinguishes between standard TV channels and cable (CATV)
●
channels.
When AUTO PRESET CH action is completed, the lowest memorized
●
channel reappears on the screen.
When you press the CH(annel) ▲ or ▼ button after selecting "AUTO PRESET CH",
●
the tuner will stop at the memorized channels only.
The TV may recognize TV channels to be CATV channels by receiving conditions. In this case,
●
try AUTO PRESET CH action again after checking antenna connection.
When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS"
●
will appear on the display after the completion of channel scanning.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then press the VOL(ume) ▲ button.
OPERATIONS
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) ▲ or ▼ button.
3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
SETTING THE SLEEP TIMER
The sleep timer function allows you to have the power automatically turn off after a set time peri-
od.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control.
2) You may change the sleep time by pressing the SLEEP button on the
remote control repeatedly. The timer can be set up to 90 minutes. 10 min-
utes each time the SLEEP button is pressed (The timer
display counts up each time on the screen as you press
the SLEEP button on the remote control).
Note: When you disconnect the unit from the AC outlet
or when you have a power failure, the sleep time will be
lost.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news and prerecorded tapes,
etc. with either a dialogue caption or text dis-
play added to the program.
: Press the VOL(ume) ▲ or ▼ button.
PICTURE
PICTURE
CHANNEL SET
CHANNEL SET
[ENG] / ESP / FRA
[ENG] / ESP / FRA
V-CHIP SET UP
V-CHIP SET UP
CAPTION [OFF]
CAPTION [ C1]
TV SOUND [MAIN]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
ADD/DELETE
AUTO PRESET CH
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
To cancel the sleep timer:
Press the SLEEP button repeatedly
until "SLEEP 0" is displayed.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point
to "CAPTION".
3) Press the VOL(ume) ▲ or ▼ button to
select the mode you wish.
4) When done, press the MENU button to exit
the menu.
PICTURE
PICTURE
CHANNEL SET
CHANNEL SET
[ENG] / ESP / FRA
[ENG] / ESP / FRA
V-CHIP SET UP
V-CHIP SET UP
CAPTION [ C2]
CAPTION [ T1]
TV SOUND [MAIN]
TV SOUND [MAIN]
3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4) Use the CH(annel) ▲ or ▼ button to select the channel you wish to put
into memory or to erase from memory.
Note: The menu will disappear automatically in about 10 seconds.
Perform "ADD/DELETE" function while this display appears on the
screen.
Press the VOL(ume) ▲ or ▼ button to light up the channel number
●
in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume) ▲ or ▼ button to light up the channel number
●
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
MTS (Multi-Channel Television Sound) SYSTEM
You can listen to a program in MTS stereo by following the steps below.
Menu
Selection
PICTURE
MAIN
Type of
CHANNEL SET
broadcast
[ENG] / ESP / FRA
Regular
-None-
V-CHIP SET UP
Stereo
CAPTION [OFF]
STEREO
broadcast
TV SOUND [MAIN]
MAIN
SAP
[To Select STEREO, MONO or SAP in Stereo broadcast]
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point to "TV SOUND".
3) Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode
([MAIN], [MONO] or [SAP]).
: Press the VOL(ume) ▲ or ▼ button.
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the
VOL(ume) ▲ or ▼ button.
GAME MODE
Set to the most suitable position for video
games.
[+] : ON [-] : OFF
BRIGHT
Adjust until the darkest parts of the picture are
as bright as you prefer.
[+] : increase brightness [-] : decrease brightness
CONTRAST
SLEEP 10
Adjust to increase or decrease contrast.
[+] : increase contrast [-] : decrease contrast
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color [-] : be pale color
TINT
Adjust to obtain natural skin tones.
[+] : greenish tone [-] : reddish tone
SHARPNESS
Adjust to detail in the picture.
[+]:increase sharpness [-]:decrease sharpness
Notes:
"+" is achieved by pressing the VOL(ume)
●
▲ button and "-" by pressing the
VOL(ume)▼ button.
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
: Press the CH(annel) ▲ or ▼ button.
CAPTION [ T2]
TV SOUND [MAIN]
[-]
GAME MODE
[+]
[-]
OFF
ON
To show the status, press the DISPLAY
PICTURE
MONO
SAP
button on the remote control.
CHANNEL SET
[ENG] / ESP / F
-None-
-None-
SAP: Second Audio Program, which
V-CHIP SET UP
means your program can also be
MONO
CAPTION [OFF
STEREO
received in a second language or
TV SOUND [MO
sometimes a radio station.
MAIN
SAP
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MONO]
In the preceding steps, the picture adjust-
●
ment display will disappear from the TV
screen automatically after about 10 seconds
if you do not press any buttons. Press the
MENU and VOL(ume) ▲ button so that
"PICTURE" is selected. Then, press the
CH(annel) ▲ or ▼ button repeatedly until
the display returns to the screen.
If you adjust another picture control after
●
you set the Game mode to [ON], the Game
mode is set to [OFF] automatically.
[USING THE GAME BUTTON]
You may also set the Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. "GAME"
appears on the TV screen.
To exit the Game mode and external input
●
mode, press the INPUT SELECT button on
the remote control.
To cancel the Game mode only, adjust the
●
picture control. The GAME mode will be set
to [OFF] automatically as explained in the
previous section. In this case, "VIDEO2"
(external input mode) instead of "GAME"
appears on the TV screen.
If you press the GAME button when the TV
●
is off, the TV turns on and will be in the
Game mode and external input mode auto-
matically.
BRIGHT
[+]
[-]
[+]
[-]
CONTRAST
COLOR
ADD/DELETE
AUTO PRESET CH
PICTURE
CHANNEL SET
[ENG] / ESP / FRA
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [SAP]
[+]
[-]
[+]
[-]
SHARPNESS
[+]
TINT
Publicidad
