Philips AZ 1065 Manual De Instrucciones página 10

All manuals and user guides at all-guides.com
CD PLAYER
Erasing a programme
You can erase the programme by:
– pressing STOP 9 once in the STOP position;
– pressing STOP 9 twice during playback;
– pressing the CD door open;
– switching to another source: TAPE/TUNER.
• The display shows '
CD player and CD handling
• The lens of the CD player should never be touched!
• If the CD player cannot read CDs correctly, use a commonly
available cleaning CD to clean the lens before taking the set to
repair. Other cleaning methods may destroy the lens.
• Sudden changes in the surrounding temperature can cause
condensation to cloud over on the lens of your CD player.
Playing a CD is then not possible. Do not attempt to clean the
lens but leave the set in a warm environment until the
moisture evaporates.
• Always keep the CD compartment closed to avoid dust on the
lens.
• To take a CD out of its box, press the centre spindle while
lifting the CD. Always pick up the CD by the edge and return
the CD to its box after use to avoid scratching and dust.
• To clean the CD, wipe in a straight line from the centre
towards the edge using a soft, lint-free cloth. Do not use
cleaning agents as they may damage the disc.
• Never write on a CD or attach any stickers to it.
CASSETTE PLAYBACK
1. Select TAPE source.
™ The display shows
function indication lights up.
2. Press STOP•OPEN 9/ to open the cassette door.
3. Insert a recorded cassette and close the cassette door.
4. Press PLAY 1 to start playback.
5. To pause playback, press PAUSE ;. To resume, press the key
again.
6. By pressing SEARCH 5 or 6 fast winding of the tape is
possible in both directions.
7. To stop the tape, press STOP•OPEN 9/.
– The keys are automatically released at the end of the tape and
the indication and function light go out, except if
PAUSE ; has been activated.
10
' briefly.
throughout tape operation, and the
CASSETTE RECORDER
X