Titan Pro Rail Manual De Instrucciones página 7

NO-CUT STAIR BRACKET
Warning: Always wear safety goggles.
Titan Pro Rail exceeds International Building Code and International Residential Code requirements to be used as a guard. For technical
details, please contact our customer service department at (877) 420-7245.
NOTE: Check with your local building code office for design load requirements for guard rails and bottom space requirements. All supporting
structures should be built in accordance with applicable building codes.
LIMITED WARRANTY
To obtain and review a copy of the warranty please go to: rdirail.com/warranty. You can also contact (877) 420-7245 or write to:
RDI Warranty, 545 Tilton Road, Egg Harbor City, NJ 08215 to obtain a copy of the warranty.
STAIR RAIL COMPONENT LIST:
Check the kit to ensure all components are included.
B
A
C D
E
NO-CUT STAIR BRACKET COMPONENT LIST:
Check the kit to ensure all components are included.
A
B
Hardware
E F
A) Aluminum Bottom Rail Stiffener – 1
B) Vinyl Bottom Rail – 1
C) Aluminum Top Rail Stiffener – 1
D) Vinyl Top Rail – 1
E) Balusters – (see chart below)
RAIL LENGTH
6' Kit
8' Kit
A) Top Mounting Bracket – 2
C
B) Bottom Mounting Bracket – 2
C) Bracket Plugs – 8
D) Button Covers – 4
D
E) Wood Screws – 8
F) Steel Screws – 8
G) Rail Set Screws – 4
G
TOOLS NEEDED:
– Safety goggles
– Tape measure
– Pencil
– Level
– Power screwdriver/drill
– Power saw
– Vinyl adhesive
1" SQUARE BALUSTERS PER KIT
12
16
1 ¼" SQUARE BALUSTERS PER KIT
11
15
7