Publicidad
Idiomas disponibles
Idiomas disponibles
circumstances.
f)
Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming devices and draining de-
vices can be fi tted, make sure that these
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work. You will be able
to work better and more safely within the gi-
ven performance boundaries.
b) Do not use an electric tool with a defec-
tive switch. An electric tool that cannot be
switched on or off is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down. This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance. Electric tools are dange-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is aff ec-
ted. Damaged parts must be repaired be-
fore using the appliance. Many accidents
are caused by badly maintained electric tools.
f)
Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, spare parts, etc. in accordance with
these instructions. Take the conditions
in your work area and the job to perform
into account. Using electric tools for any
purpose other than the one for which they are
intended can lead to dangerous situations.
Anl_SA_BEM_1032_SPK8.indb 22
Anl_SA_BEM_1032_SPK8.indb 22
GB
5. Service
a) Have your electric tool repaired only by
trained personnel and/or the authorized
service agent, using only genuine spare
parts. This will ensure that your electric tool
remains safe to use.
Explanation of the warning signs on the
equipment (see Fig. 9)
1= Read the directions for use before operating
the equipment.
2= Keep all other persons away from the danger
zone.
3= Caution: Sharp blades! Pull out the power
plug before carrying out any repair work or if
the power cable is damaged. The blades will
continue to rotate after the motor is switched
off .
4= Caution: Keep the power cable away from the
cutters!
Special safety information
Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
General safety regulations for this electrical
tool
This equipment is not allowed to be used by
children. Children should be supervised so that
they do not play with the equipment. Children are
not allowed to carry out the cleaning or mainte-
nance. This equipment is not allowed to be used
by people with limited physical, sensory or mental
capacities or by those with insuffi cient knowledge
or experience unless they are supervised or inst-
ructed by a person who is responsible for them.
Safety instructions for hand mower
•
Before use, check the mains cable and exten-
sion cable for signs of damage and aging.
•
If the cable is damaged during operation, dis-
connect it immediately from the power supply.
•
Check the machine for signs of damage be-
fore use. Repairs may only be carried out by
our service workshop. If unusual vibrations
occur during use, switch the machine off im-
mediately and pull the plug. Check the cutters
and clean them if necessary. If the machine
continues to vibrate, switch it off, disconnect
- 22 -
01.12.2016 13:08:50
01.12.2016 13:08:50
Publicidad
